Here is a simple gcode generator to test out some settings on your reprap/repstrap if you are having trouble getting skeinforge working. This only has a few settings (layer height, extrusion width and speed) and will make either a open-top cube or cylinder.

 Keep in mind when using this, it is just testing software and some quick scripts to see if your machine works at all. It is not intended to make high quality prints or complex objects.

You may wish to adjust the temp settings of the output (just search and replace all the M104 SXXX T0 lines with XXX = to *C of the temp you want). Some of the setting, like the warmup/cooldown I borrowed from skeinforg. Some of the gcode might need to be cleaned up (line breaks before M commands) or you can fix it in the source.

https://sourceforge.net/projects/binaryconstruct/files/RepRap/

• Add New

Comments (0)

Write comment

Your Contact Details:

Name:

Email: do not notifynotify

Comment:

Title:

Message:

Security

Please input the anti-spam code that you can read in the image.

Joomla components by Compojoom